Table of Contents
Advertisement
Appendix A - Troubleshooting
Following these simple steps can eliminate most common problems without
the need to call Technical Support.
1. Install software first. After installing the software then proceed to adding
the hardware. This places the required installation files in the correct
locations.
2. Identify all I/O adapters currently installed in your system. This includes
your on-board serial ports, controller cards, sound cards etc. The I/O
addresses used by these adapters, as well as the IRQ (if any) should be
identified.
3. Ensure that there is no conflict with currently installed adapters. No two
adapters can occupy the same I/O address and may not be allowed to share
IRQs.
4. Make sure the Sealevel Systems adapter is securely installed in a
motherboard slot.
Sealevel Systems PIO-32.PCI
Appendix A - Troubleshooting
Page 15
Advertisement
Table of Contents
