System Installation - SeaLevel PIO-24.PCI 8008 User Manual

System Installation

The PIO-24.PCI can be installed in any of the PCI expansion slots.
1. Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available PCI slot and remove the blank metal slot cover.
4. Remove the clamping portion of the bracket from the card.
5. Gently insert the PIO-24.PCI into the slot. Make sure that the adapter
is seated properly.
6. Feed the 50-pin ribbon cable through the cutout bracket and connect it
to the card.
7. Replace the bracket retaining screw.
8. Install the clamping portion of the bracket
9. Replace the computer cover.
10. Connect the power cord. Installation is complete.
Sealevel Systems PIO-24.PCI
Introduction and Installation
Page 2