Lock-Out Count; Tone Or Pulse Dialing; Enable Or Disable Auto Answer - PACH & COMPANY AeGIS 8000 Series Installation And Programming Manual

FUNCTION CODE
72

LOCK-OUT COUNT

(Default setting is 3)
The system will be disabled if invalid access
code has been entered according to the lock-out
count setting. The system will ignore further
access code entries for 90 seconds.
73

TONE OR PULSE DIALING

(Default setting is 1 for tone)
74

ENABLE OR DISABLE AUTO ANSWER

(Default setting is 1 for enable)
Pach and Company
AeGIS 8000 Series
Step 3 Enter • 1 = enable
• 0 = disable
then press #
Step 4 Proceed to step 2 and select the same function code or different
function code to continue programming or press
programming mode and you will hear " three short beeps".
Step 1 Log on to programming mode, see instruction above. The display
will show
Select Func: _ _
Step 2 Enter function code 72 then press #, the display will show
LOCK-OUT CNT: 3
Step 3 Enter the lock-out count (1-9) and then press #
Step 4 Proceed to step 2 and select the same function code or different
function code to continue programming or press
programming mode and you will hear " three short beeps".
Step 1 Log on to programming mode, see instruction above. The display
will show
Select Func: _ _
Step 2 Enter function code 73 then press #, the display will show
TONE=1 PULSE=0: 1
Step 3 Enter • 1 = Tone
• 0 =Pulse
then press #
Step 4 Proceed to step 2 and select the same function code or different
function code to continue programming or press
programming mode and you will hear " three short beeps".
Step 1 Log on to programming mode, see instruction above. The display
will show
Select Func: _ _
Step 2 Enter function code 74 then press #, the display will show
AUTO ANSWER=1 :1
Step 3 Enter • 1 = Enable auto answer
• 0 = Disable auto answer
then press #
Step 4 Proceed to step 2 and select the same function code or different
function code to continue programming or press
programming mode and you will hear " three short beeps".
Chapter 3
PROGRAMMING
PROGRAMMING
to exit the
*
to exit the
*
to exit the
*
to exit the
*
Page 17