Manual Unlock And Lock Relay 1; Single Or Multi Systems - PACH & COMPANY AeGIS 8000 Series Installation And Programming Manual

FUNCTION CODE
05

MANUAL UNLOCK AND LOCK RELAY 1

(DOOR 1)
06
MANUAL UNLOCK AND LOCK RELAY 2
(DOOR 2)
07

SINGLE OR MULTI SYSTEMS

(DEFAULT SETTING IS=1 FOR
SINGLE)
SINGLE: one system connects to a phone line.
MULTI: more the one systems connect to a
phone line (sharing the phone line).
Pach and Company
AeGIS 8000 Series
Step 1 Log on to programming mode, see instruction above. The display
will show
Select Func: _ _
Step 2 Enter function code 05 then press #, the display will show
OPEN1:00 HOURS
Step 3 Enter • 01-98 hours to unlock door 1
• 99 hours to unlock door 1 for indefinite time
• 00 hours to lock door 1
then press # or * to cancel.
Step 4 Proceed to step 2 and select the same function code or different
function code to continue programming or press
programming mode and you will hear " three short beeps".
Step 1 Log on to programming mode, see instruction above. The display
will show
Select Func: _ _
Step 2 Enter function code 06 then press #, the display will show
OPEN2:00 HOURS
Step 3 Enter • 01-98 hours to unlock door 1
• 99 hours to unlock door 1 for indefinite time
• 00 hours to lock door 1
then press # or * to cancel.
Step 4 Proceed to step 2 and select the same function code or different
function code to continue programming or press
programming mode and you will hear " three short beeps".
Step 1 Log on to programming mode, see instruction above. The display
will show
Select Func: _ _
Step 2 Enter function code 07 then press #, the display will show
SING=1, MULT=0: 1
Step 3 Enter • 1 for Single system
• 0 for multi systems
then press # or * to keep the current setting.
Step 4 Proceed to step 2 and select the same function code or different
function code to continue programming or press
programming mode and you will hear " three short beeps".
Chapter 3
PROGRAMMING
PROGRAMMING
to exit the
*
to exit the
*
to exit the
*
Page 11