TO USE 4-DIGIT PERSONAL ACCESS CODE Personal access code is used to unlock the door without using a key.
TO CHECK THE TOTAL NUMBER OF
TENANT
TO ADJUST THE LCD INTENSITY
TO ADJUST SPEAKER AND MICROPHONE
VOLUME
Pach and Company
AeGIS 8000 Series
Press
the the 4-digit access code.
*
Step 1 Log on to programming mode, see instruction above. The display
will show
Select Func: _ _
Step 2 Press 91 then press #, the system will show the total number of
tenant.
Note:
A tenant directory with no name will not be included as a total
number of tenant.
Turn the LCD adjustment pot (VR3) CLOCKWISE to increase or
COUNTER CLOCKWISE to decrease the intensity.
Turn the speaker and microphone adjustment pot (VR2), CLOCKWISE to
increase or COUNTER CLOCKWISE to decrease.
Chapter 4
SYSTEM'S OPERATION
Page 21