Manual Lock (Open) Or Unlock (Close) Door; Selecting Directory Digits - PACH & COMPANY AeGIS 7000 Series Installation And Programming Manual

Hide thumbs Also See for AeGIS 7000 Series:
Table of Contents

Advertisement

FUNCTION CODE
Step 4 Press 5 then # to delete or
Step 5 Proceed to step 2 and select the same Function
Step 1 Log on to programming mode (see section 3.1),
05
MANUAL LOCK
(OPEN) OR
UNLOCK (CLOSE)
Step 2 Enter Function Code 05 then press #, the
DOOR
Step 3
Step 5 Proceed to step 2 and select the same Function
Step 1 Log on to programming mode (see section 3.1),
06
SELECTING
DIRECTORY DIGITS
Step 2 Enter Function Code 06 then press #, the
Factory default setting is
3-digit.
Step 3 Enter the Directory Digits 2, 3 or 4 then press #
Step 4 Proceed to step 2 and select the same Function
Pach and Company
AeGIS 7000 Series
LOCAL PROGRAMMING
• Press
to cancel deletion and you hear "One
*
Long Beep" and proceed to step 5.
Press
to cancel deletion.
*
Code or different Function Code to continue
programming or press * to exit the programming
mode and you will hear "Three Short Beeps".
the display shows:
display shows:
Enter
• 01-98 hours to unlock door or
• 99 hours to to unlock door for
indefinite time or
• 00 hours to lock door
then press # or press
to cancel.
*
Code or different Function Code to continue
programming or press
to exit the programming
*
mode and you will hear "Three Short Beeps".
the display shows:
display shows:
or press
to keep the existing one.
*
Code or different Function Code to continue
programming or press
to exit the programming
*
mode and you will hear "Three Short Beeps".
PROGRAMMING
Step 1 Log on to programming mode,
Step 2 Enter Function Code 05 then
Step 3 Enter
Step 4 Select another Function Code to
Chapter 3
TOUCH TONE PROGRAMMING
see section 3.2 If you have
logged on proceed to step 2.
press #, you hear "One Short
Beep".
• 01-98 hours to unlock
door or
• 99 hours to to unlock
door for indefinite time
or
• 00 hours to lock door
then press # you will hear "Two
Long Beeps" and "Two Short
Beeps".
program another parameter or
tenant's directory, otherwise enter
91 then press # to disconnect the
call, you hear "Three Short
Beeps".
NOT AVAILABLE.
Page 12
10/01/01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents