Function Code 28 Unlock Relay 1 Time; Function Code 29 Unlock Relay 2 Time; Function Code 33 Temporary Code - PACH & COMPANY QUANTUM QC Series Manual

2. Enter 27 then #
3. Enter 10-240 seconds then press #

Function Code 28 Unlock Relay 1 Time

Relay 1 trigger time.
1. Log-in to programming
2.
Enter 28 then #
3. Enter 01-99 (second) then press #

Function Code 29 Unlock Relay 2 Time

Relay 2 trigger time.
1.
Log-in to programming
2.
Enter 29 then #
3. Enter 01-99 (second) then press #

Function Code 33 Temporary Code

The code will expire after a certain amount of used (1-10 times) in the programming, Up to 10 temporary codes can be programmed.
1. Log-in to programming
2. Enter 33 then #
3. Enter 0= delete existing temporary code or 1= add temporary code then press #
4. Enter code number 01-10 then press #