Transfer - Otto Bock Motus Instructions For Use Manual

During reassembly, ensure that the footrest locking device has engaged.
INFORMATION
The standard equipment includes removable quick-release axles on the rear wheels which facilitate
transportation of your wheelchair.
To remove the rear wheels, press the button on the quick-release axle as described in Chapter 3. The
rear wheels can then be removed (Fig. 1).
Accident risk.
CAUTION
and that the quick-release rear wheel axles and casters securely lock into their axle housings. The rear
wheels and casters must not be removable without the button being depressed! Check the function of the
brakes.

4.1 Transfer

Transfer into the wheelchair is described below. The Motus is designed for persons who normally use a
wheelchair independently, and for this reason we describe an independent transfer. Should you require
an attendant, the steps described here can be carried out in the same way, but with attendant support.
Maneuver the wheelchairs so that they are positioned at an angle of approx. 45° degrees to each other
(Fig. 11). Ensure that the wheel locks do not get caught in each other but remain freely movable. First
activate the wheel locks of the wheelchair that is currently in use (Fig.12).
9
During assembly, confirm that all bolts engage in the corresponding bore holes
11
10
12
13