Advertisement
1.
Read Instructions
Read all of the safety and operating instructions before using the
product.
2.
Retain Instructions
Save these instructions for future reference.
3.
Attachments / Accessories
Do not use attachments or accessories unless recommended by
the appliance manufacturer as they may cause hazards, damage
product and void warranty.
4.
Installation
Do not place or mount this product in or on an unstable or
improperly supported location. Improperly installed product may fall,
causing serious injury to a child or adult, and damage to the
product. Use only with a mounting device recommended by the
manufacturer, or sold with the product. To insure proper mounting,
follow the manufacturer's instructions and use only mounting
accessories recommended by manufacturer.
5.
Power source
This product should be operated only from the type of power source
indicated on the marking label.
Operating
Before using, make sure power supply and others are properly
connected.
While operating, if any abnormal condition or malfunction is
observed, stop using the camera immediately and then contact
your local dealer.
Handling
Do not disassemble or tamper with parts inside the camera.
Do not drop or subject the camera to shock and vibration as this
can damage camera.
Do not block the cooling holes on the bracket. This camera has a
cooling fan inside the housing. Blocking the cooling holes will
cause heat to build up and cause malfunction.
Care must be taken when you clean the clear dome cover.
Scratches and dust will ruin the image quality of your camera. Do
not use strong or abrasive detergents when cleaning the camera
body. Use a dry cloth to clean the camera when it is dirty. In case
the dirt is hard to remove, use a mild detergent and wipe the
camera gently.
Installation and Storage
Do not install the camera in areas of extreme temperatures in
excess of the allowable range. (14°F~ 122°F / -10°C ~ 50°C)
Avoid installing in humid or dusty places. The relative humidity
must be below 90%.
Avoid installing in places where radiation is present.
Avoid installing in places where there are strong magnetic fields
and electric signals.
Avoid installing in places where the camera would be subject to
strong vibrations.
Never face the camera toward the sun. Do not aim at bright
objects. Whether the camera is in use or not, never aim it at the
sun or other extremely bright objects. Otherwise the camera may
be smeared and damaged.
Advertisement
