Advertisement
1.
Type the IP address of the camera in a web browser.
or
Use the included Camera Finder software and locate the camera
on the IP Finder list, then double-click the camera to open the
Viewer software in your web browser.
2.
Log in to the camera with the appropriate User Name and
Password.
Note
The default User name is Admin and the default Password
is1234. The username and password are case sensitive.
The Administrator account has the authority to configure the IP camera
and authorize users' access to the camera. The User accounts have
access to the camera with limited authority.
The username and password are case sensitive. It is strongly
recommended that the password be changed after the initial setup to
prevent unauthorized access.
Username – Admin
Password – 1234
16
AvertX IP cameras are optimized for use with AvertX HDIP recorders,
but you can also connect to your AvertX IP cameras using third party
software like VLC media player (http://www.videolan.org).
To connect the camera you may need to provide the stream URL. All
AvertX IP cameras are capable of delivering two RTSP streams, as well
as streaming MJPEG over HTTP. The stream URLs are listed below.
rtsp://<ip address>/mjpeg
rtsp://<ipaddress>/h264
http://<ipaddress>:8008
The MJPEG over HTTP stream is identified by a port number. The
default port is 8008; this port can be configured in the camera's System
page (click Setup, and then click System).
Advertisement
