Advertisement
On the Streaming tab, you can configure specific video resolution, video
compression mode, and video protocol and audio transmission mode.
Your AvertX IP camera can transmit two streams of video at the same
time. One stream can be in high definition for recording, and the other
can be a lower resolution used for live display. By using dual streams,
you can display more cameras on the monitor of your recorder without
taxing the CPU.
Resolution – Set the resolution for each stream.
GOP – Set the Group of Pictures (GOP) size for each stream. This
setting can affect image quality and bandwidth. Please consult with
technical support before changing this setting.
Bit Rate – Set the data transmission speed for your camera. A lower bit
rate will result lower image quality but a smaller file size and more
bandwidth availability.
Frame Rate – Set the frame rate of each stream. A lower frame rate will
result in more bandwidth availability.
20
If your camera is installed on a wall or table top the image may appear
to be upside down. Rotate the camera video image using the software
to get a right-side-up image.
Note
You cannot rotate the video image 90° to get a vertical image.
Rotating the image 90° will stretch and distort the video image.
To rotate the camera video image:
1.
Click Setup.
2.
Click Streaming.
3.
From the Video Rotation list, select the desired rotation.
Normal transmits the image as the camera sees it.
Flip transmits the image backwards and upside down.
Mirror transmits a mirror image.
Rotate 90 degree clockwise/counterclockwise
180 degree transmits the image upside down.
Advertisement
