Front Bezel; Removing The Front Bezel; Replacing The Front Bezel; Figure 7-3 Removing And Replacing The Front Bezel - HP Integrity rx4640 Operation And Maintenance Manual

Removing and Replacing Components

Front Bezel

Front Bezel
The server does not have to be turned off to remove the front bezel.
Opening the control panel door provides access to the following components:
• Power switch
• System LEDs
Figure 7-3 Removing and Replacing the Front Bezel

Removing the Front Bezel

To remove the front bezel, perform the following steps:
Step 1. Grasp the front bezel at the outer edges and pull straight out.

Replacing the Front Bezel

To Replace the front bezel, perform the following steps:
Step 1. Push the front bezel straight into the chassis until it snaps into place.
144
Chapter 7