Starting 4-Channel Recording - Tascam DR-60DmkII Reference Manual

9. Turn the DATA dial to set the decoding mode when using a
mid-side mic.
Options Explanation
OFF Record in ordinary stereo mode.
Use to decode while recording. Playback is
REC
conducted without decoding.
Record mid-side mic output without decoding
for decoding later. Use this mode to monitor
when recording with a mid-side mic.
MONITOR
Use this also when playing back mid-side files
that were recorded without decoding.
10. When finished making the setting, press the MENU button to
return to the screen.
MENU
11. Turn the DATA dial to select
DATA dial or / button to open the INPUT SETTING screen.
12. Turn the DATA dial to select
/ button.
13. Turn the DATA dial to set the value according to the distance
between mics.
Range: (default value) to ±
0ms
, and press the
INPUT SETTING
, and press the DATA dial or
DELAY
(in 1ms increments)
150ms
NOTE
•
If the mics (channels 1/2 and channels 3/4) are far apart from
each other, a time delay could occur when recording. Use the
setting to eliminate this time delay when recording.
DELAY
•
The setting can be changed even during recording
DELAY
standby and when recording.
14. When finished making the setting, press the stop (8) [HOME]
button to return to the Home Screen.

Starting 4-channel recording

1. Press the record (0) button to begin recording standby.
NOTE
Before you start recording you can confirm the recording audio
file format and sampling frequency at the top of the recording
screen, as well as the input sources on the left and the recording
project name beneath the meter bars.
Press the record (0) button again to start recording.
2.
4 – Recording
45
TASCAM DR-60DMKII