Table of Contents
Advertisement
8 – Recording
Setting the second medium for backup and relay
recording
Select BACKUP/RELAY MEDIA, and open the BACKUP/RELAY ME-
DIA screen. (See "Menu operation procedures" on page 22.)
Set the secondary media to be used for backup and relay record-
ing when each medium is current.
0 Select the SD1 item, and set the second medium (SUB MEDIA)
to be used for backup and relay recording when it is the cur-
rent medium (MAIN MEDIA).
Options: SD2 (default), USB
0 Select the SD2 item, and set the second medium (SUB MEDIA)
to be used for backup and relay recording when it is the cur-
rent medium (MAIN MEDIA).
Options: SD1 (default), USB
0 Select the USB item, and set the second medium (SUB MEDIA)
to be used for backup and relay recording when it is the cur-
rent medium (MAIN MEDIA).
Options: SD1 (default), SD2
NOTE
i CD cannot be selected as the backup or relay recording me-
dium. Moreover, if the current medium is CD, the REC 2 page
BACKUP/RELAY MEDIA item will be shown as "-------".
i The medium with (CURRENT) after its [MAIN MEDIA] name is
the current medium now.
i A folder with the same file path as the current media will be
created on the secondary media and used for backup and
relay recording.
WAV file settings
Select WAV SETTING, and open the WAV SETTING screen. (See
"Menu operation procedures" on page 22.)
0 Select FORMAT TYPE, and set the file format to use for WAV
recording.
Options: WAV (default), BWF
0 Select BIT LENGTH, and set the bit length to use for WAV re-
cording.
Options: 16bit (default), 24bit
NOTE
i This item does not appear when the current medium is CD.
i When dual format recording is on, 24bit cannot be selected.
62
TASCAM SS-CDR250N / SS-R250N
MP3 file bit rate setting
Select MP3 BITRATE, and open the MP3 BITRATE screen. (See
"Menu operation procedures" on page 22.)
Set the bit rate to use for MP3 format recording.
Options: MP3-64kbps, MP3-128kbps, MP3-192kbps (default),
MP3-256kbps, MP3-320kbps
Recording input channel settings
Select STEREO/MONO, and open the STEREO/MONO screen. (See
"Menu operation procedures" on page 22.)
Set the input channel to record.
Option
Meaning
Save the left and right channel input sounds to a
STEREO
(default)
stereo file.
Mix the left and right channel input sounds and
MONO(MIX)
save the mix as a mono file.
Save the left and right channel input sounds to
MONO(2ch)
two separate mono files.
NOTE
If the current medium is CD and the REC FORMAT item is set to
CD-DA, the file will be recorded as STEREO, regardless of the
setting. In this case, the REC 3 page STEREO/MONO item will
appear as "-------".
Advertisement
Table of Contents
