Clean; Replace - Peak Pilates Deluxe Reformer Assembly Manual

Table of Contents

Advertisement

Clean

• Framework – The wooden components on this equipment are finished with a non-toxic, waterbased lacquer. Other than an
occasional wipe down using a mild soapy solution or furniture polish, no additional cleaning is necessary. The metal framework
should be cleaned with a mild soapy solution.
• Upholstery – We recommend wiping down your vinyl upholstery with a mild cleaning solution after each use. Mix 1 part mild
cleaning solution and 12 parts water in a spray bottle.
• Tracking System – The tracks upon which your carriage rides are anodized to inhibit the build-up of unsightly aluminum oxide
residue. Clean them on an as-needed basis using a warm, mild soapy water solution and dry thoroughly with a soft cloth.

Replace

• Springs – We recommend that you replace all of the springs every two years, minimum. Any spring that exhibits early signs of
fatigue (for example, separation in coils, even if slight) should be replaced immediately.
• Ropes – You may experience some minor "fraying" or "pilling" on the cotton rope. "Fraying" or "pilling" is completely normal and to
be expected. Any ropes that tear or otherwise fail should be replaced immediately. The ropes can be used until the "fraying" affects
their function.
• Foot Loops, Handles and Safety Clips – These parts wear over time. Replace them as needed.
Warning: Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.
31
Peak PilateSystem
Assembly Guide
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents