Unfolding The Machine - Peak Pilates Deluxe Reformer Assembly Manual

Unfolding the Machine

When you have removed the Peak PilateSystem from the packaging, it will look like the photo below with a nylon band
wrapped horizontally around the machine.
Note: The unfolding process can be performed from left side of the machine.
1. Roll the machine to the desired location. Do not roll
the machine on an incline or on thick pile or heavily
padded carpet.
2. Stand at the back of the machine and undo the Lock
Strap. The shipping band will prevent the machine
from unfolding.
3. Place one hand on the Foot End Rail to prevent it from
unfolding when the shipping band is cut. Cut the band
and remove the triangular cardboard shown in the
photo above.
4. The machine is shipped with the Head End Locking
Mechanism unlocked. The rails can now unfold.
Allow the rails to slowly unfold until the safety
feature engages.
Caution: When you undo the Lock Strap, the rails may begin to unfold.
13 Peak PilateSystem Assembly Guide
®