Chapter 4: Operating The Peak Pilatesystem; Folding The Peak Pilatesystem - Peak Pilates Deluxe Reformer Assembly Manual

Chapter 4: Operating the Peak PilateSystem

The following describes how to:
• Fold and unfold the machine
• Adjust the Footbar, Gear Change Bar, Head Rest, and Risers
• Attach the Reformer Springs
• Install the Jump Board and the Long/Short Box
• Convert to the Mat mode

Folding the Peak PilateSystem

The Peak PilateSystem must be in the Reformer configuration (unfolded, no mats) before unfolding.
Caution: Do not attempt to fold or roll the machine on thick pile or heavily padded carpet.
To fold the machine:
1. Make sure that at least the center Reformer Spring is attached.
2. Place the Gear Bar in position -1 (see "Adjusting the Gear Change
Bar" on page 25).
3. Fold the Footbar and the Support Bar (see "Adjusting the Footbar"
on page 24).
4. Place the Foot Loops (whichever is attached to the Rope Assembly)
on the Shoulder Pad Posts.
Peak PilateSystem Assembly Guide
®
®
®
19