Staple Jam In The Saddle Stitch Unit - Toshiba E-studio2555c Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
Close the front cover of the finisher.
12
 Staple jam in the Saddle Stitch unit
1 Open the front cover of the finisher, and pull out the
Saddle Stitch unit until it stops.
Remove the staple cartridge.
2
Raise the guide while holding the knob.
3
Do not touch the stapling area.
The actual needle point could cause you personal injury.
Remove the top staple sheet.
4
1 TROUBLESHOOTING FOR THE HARDWARE
1 1
2 2
Clearing a Staple Jam 49