Staple Jam In The Saddle Stitch Unit - Toshiba e-STUDIO5520c Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
5
Holding the knob, raise the guide, and return it to its
original position.
6
Remove the staples fallen between the staple
cartridge and the staple case or the ones in the staple
receiver.
7
Fit the staple cartridge into the stapler.
When fitting the staple cartridge, hold the green-labeled portion of the
bracket securely so that the bracket does not move.
Insert the cartridge until it is caught by the latch and secured with a
click.
8
Close the front cover of the Finisher.

Staple jam in the Saddle Stitch unit

1
Pull out the Saddle Stitch unit until it stops.
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 43