Aficio B2867757 Operating Instructions Manual page 61

Message
Insufficient mem-
ory.Reduce the
scanning area.
Error has oc-
curred within the
scanner driver.
Scanner is in use
by another func-
tion.
Insufficient mem-
ory. Reduce reso-
lution, original
size, or scanning
area.
No User Code is
registered. Con-
sult your system
administrator.
Any of Login User
Name, Login Pass-
word or Driver
Encryption Key is
incorrect.
Reference
"Turning On the Power", About This Machine
Cause
Scanner memory is
insufficient.
An error has occurred in
the driver.
A function of the ma-
chine other than the
scanner function is being
used such as the copier
function.
The computer does not
have enough memory.
Access is restricted with
user codes.
The entered login user
name, password, or driv-
er encryption key was
invalid.
When a Message Appears
Solution
• Reset the scan size.
• Lower the resolution.
• Set with no compression. See
TWAIN Driver help.
The problem may be due to the follow-
ing cause:
• "The Relationship between the Reso-
lution and the Scanning Area" chart
in Help for halftone scanning might
not always apply. Scanning cannot
be performed if large values are set
for brightness when using halftone
or high resolution.
• Check whether the network cable is
connected correctly to the client
computer.
• Check whether the Ethernet board of
the client computer is recognized
correctly by Windows.
• Check whether the client computer
can use the TCP/IP protocol.
Wait for a while and reconnect.
Reduce the resolution or size of scan-
ning. Alternately, try scanning again af-
ter closing any other applications in use.
Contact the administrator of the machine.
• Check the login user name, login
password, and driver encryption
key.
• Permission to use this function has not
been granted. Contact the administrator.
4
55