Aficio B2867757 Operating Instructions Manual page 30

Troubleshooting When Using the Copy Function
Problem
Cannot scan originals on
mixed A series and JIS B
series paper continuously.
You cannot combine sev-
eral functions.
2
Images are skewed.
Images are skewed.
The machine does not
start copying even
though you have insert-
ed paper into the bypass
tray.
Copies shift sideways.
Copies shift sideways.
Copies shift sideways.
Copies shift in the direc-
tion of the original feed
(or opposite) direction.
Copies are shorter than
the selected size, or cut
off before the end.
❖ Edit
Problem
In Double Copies mode,
parts of the original im-
age are not copied.
In Erase Border, Erase In-
side, or Erase Outside
mode, parts of the origi-
nal image are not copied.
24
Cause
Originals on different se-
ries of paper cannot be
scanned continuously at
the same time.
Selected functions can-
not be used together.
The side fences in the cut
paper tray is not locked.
The paper is feeding in at
a slant.
Originals are not
scanned.
The paper roll is not set
correctly.
The original does not
match the size in the
original table setting.
The paper is not set cor-
rectly in the bypass tray.
Print Position Adjust-
ment or Margin Adjust-
ment mode is selected.
Print Position Adjust-
ment or Margin Adjust-
ment mode is selected.
Cause
Combination of original
and copy paper is not
correct.
You set a wide erased
margin.
Solution
Scan the originals on each series separately.
Check the combination of functions and
make the settings again. See "Function
Compatibility", Copy/Document Serv-
er Reference.
Make sure the side fences are locked. See
p.61 "Changing the Paper Size".
Load the paper correctly. See p.57
"Loading Paper".
After scanning the originals, load paper
in the bypass tray.
Set the paper roll correctly, making sure
it is straight and not loose. See p.57
"Loading Paper".
Adjust the original guides to the specified
size, and then insert the original along the
guides. See "Placing Originals",
Copy/Document Server Reference.
Make sure the paper size matches the
bypass tray's paper guides. See "Copy-
ing from the Bypass Tray", Copy/Docu-
ment Server Reference.
Cancel Print Position Adjustment or Mar-
gin Adjustment mode. See "Margin Ad-
justment" and "Adjust Print Position",
Copy/Document Server Reference.
Cancel Print Position Adjustment or Mar-
gin Adjustment mode. See "Margin Ad-
justment" and "Adjust Print Position",
Copy/Document Server Reference.
Solution
Specify the paper size again. For exam-
ple, select A3L for A4K originals. See
"Double Copies", Copy/Document
Server Reference.
Make the margin width narrower. You
can adjust it between 2 - 99 mm (0.1" -
3.9"). See "Edit", General Settings
Guide.