Aficio B2867757 Operating Instructions Manual page 31

Problem
In Erase Border, Erase In-
side, or Erase Outside
mode, parts of the origi-
nal image are not copied.
Parts of the image are not
copied.
Parts of the image are not
copied.
In Image Repeat mode,
the original image is not
copied repeatedly.
❖ Combine
Problem
When using Combine,
parts of the image are not
copied.
Copies are not in correct
order.
❖ Folding finisher
Problem
The folding finisher is not
recognized (is offline).
" Please wait. " ap-
pears on the display pan-
el and printing cannot be
done.
Cannot specify folding.
Cause
Originals are not
scanned correctly.
Print Position Adjust-
ment or Margin Adjust-
ment mode is selected.
You placed a custom size
original.
You selected copy paper
the same size as the orig-
inals, or you did not se-
lect the proper
reproduction ratio.
Cause
You specified a repro-
duction ratio that does
not match the sizes of
your originals and copy
paper.
You placed the originals
in the incorrect order.
Cause
The folding finisher is
turned off, or the folding
finisher and the machine
were not turned on in the
correct order.
The folding finisher is offline. Turn off the main power switches of both
Translucent paper or
film has been selected.
When You Cannot Make Copies As Wanted
Solution
Place the originals correctly.
Cancel Print Position Adjustment or Mar-
gin Adjustment mode. See "Margin Ad-
justment" and "Adjust Print Position",
Copy/Document Server Reference.
Enter the size of the original, or set the
scanning area wider. See "Placing Cus-
tom Size Originals" and "Wide Scan",
Copy/Document Server Reference.
Select copy paper larger than the origi-
nals or select the proper reproduction
ratio.
Solution
When you specify a reproduction ratio
using Manual Paper Select mode, make
sure that the ratio matches your origi-
nals and the copy paper. Select the cor-
rect reproduction ratio before using
Combine mode.
Start with the first page to be copied.
Solution
If the folding finishers is offline, turn off
the main power switches of both the ma-
chine and folding finisher, and then turn
them back on again in the following order:
folding finisher, and then the machine.
Then check the folding finisher is online.
the machine and folding finisher, and then
turn them back on again in the following or-
der: folding finisher, and then the machine.
Then check the folding finisher is online.
Translucent paper and film are not
available for folding. They are delivered
to the upper output stacker, but not
folded. Select another paper type, and
then specify folding.
2
25