Troubleshooting - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2
Contents

Troubleshooting

The troubleshooting page lists the status for some common
sources of errors. The list may be different for different
products and installations * .
Note that critical issues and errors are clearly marked in red
color; warnings are yellow.
* The messages shown in the illustration serve as examples. Your
system may show other information.
D15078.04 MX200 G2 and MX300 G2 Administrator Guide TC7.3, DECEMBER 2014.
Introduction Web interface Web interface
Navigate to: Diagnostics > Troubleshooting
System settings
Run diagnostics
Click Re-run diagnostics
the information in the list is up-to-date.
Leave standby mode
This button is only visible when the
system is in standby mode. If in
standby mode, click
to wake up the system.
www.cisco.com — Copyright © 2013–2014 Cisco Systems, Inc. All rights reserved.
44
Administrator Guide
Setting passwords Appendices
to make sure
Deactivate standby