Cisco TelePresence MX200 G2 Administrator's Manual page 34

Cisco TelePresence MX200 G2 and MX300 G2
Contents
User administration
(page 3 of 4)
Changing user privileges
Follow these steps in order to change the user privileges:
1. Click the name of an existing user to open the Editing
user window.
2. Check the appropriate user roles check boxes, decide if
the user has to change the password on the next sign in,
and fill in the Client Certificate DN field if using certificate
login on HTTPS.
3. Click Update User to save the changes.
Use the Back button to leave without making any
changes.
Changing the password
Follow these steps in order to change the password
1. Click the name of an existing user to open the Editing
user window.
2. Enter the new password in the appropriate input fields.
3. Click Change Password to save the change.
Use the Back button to leave without making any
changes.
The password is used with the web interface and command line
*
interface.
D15078.04 MX200 G2 and MX300 G2 Administrator Guide TC7.3, DECEMBER 2014.
Introduction Web interface Web interface
Navigate to: Configuration > User Administration
:
*
System settings
www.cisco.com — Copyright © 2013–2014 Cisco Systems, Inc. All rights reserved.
34
Administrator Guide
Setting passwords Appendices