Choosing A Ringtone - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2
Contents

Choosing a ringtone

You can choose from a set of predefined ringtones. The
chosen ringtone can be played back from this page.
The ringtone will be played back on the video system
itself, and not through the web interface.
D15078.04 MX200 G2 and MX300 G2 Administrator Guide TC7.3, DECEMBER 2014.
Introduction Web interface Web interface
Navigate to: Configuration > Personalization
Changing ringtone
Choose a ringtone from the drop-down list,
and click Save
Playing back the ringtone
Click the play button ( ► ) to play back the ringtone.
Use the stop button (  ) to end the playback.
Set the ringtone volume
Use the slide bar to adjust the ringtone volume.
System settings
to make it the active ringtone.
30
Setting passwords
www.cisco.com — Copyright © 2013–2014 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices