Customized Care Cycles; Special Cycles - Maytag LAT2300 Service Manual

For Permanent Press Loads, Press the
"Permanent Press" pad. After a slight
pause, the washer will immediately
begin filling and automatically select an
"Extra Large" Water Level, Warm
Wash/Cold Rinse and 8 minutes of agi-
tation. ("Wash 8 Minutes" will appear in
the Monitor.) Since this cycle features
a cool down rinse to minimize wrinkling
when hot or energy-saver hot wash
temperatures are used.
For Knit and Delicate Loads, (delicately
constructed knits, sheer fabrics, lace
trimmed and embroidered items,
lingerie, foundation garments,
washable woolens and "Hand
Washable" items) press the
"Knits/Delicates" pad. After a slight
pause, the washer will automatically
select an "Extra Large" Water Level,
Warm Wash/Cold Rinse and 6 minutes
of GENTLE agitation. ("Wash 6
Minutes" will appear in the Monitor.)
Customized Care Cycles
The CUSTOM CYCLE 1 and CUSTOM
CYCLE 2 pads can each be pro-
grammed with a customized cycle to
care for special loads.
To program, first press the desired
cycle pad (Regular, Perm. Press, etc.)
and make the necessary changes in
wash temperature, water level, wash
time, rinse selections and options.
When all the selections have been
made, press the custom pad and hold
until a long tone is heard.
Note: The first time CUSTOM CYCLE
pads are used, the pad must be held
until three tones are heard followed by
the long tone.) The toners) indicates
the customized cycle has been pro-
grammed. The next time that special
cycle is needed, simply press the
16001145
custom pad. The custom cycles can be
changed at any time by repeating this
procedure.
Special Cycles
The Fine Wash cycle is designed for
"hand washable" items. The washer
will agitate and soak alternately for a
total of 6 minutes with 2 minutes of that
being a GENTLE agitation. The cycle
continues with a rinse and SLOW FINAL
SPIN. To select, press the FINE WASH
pad. After a slight pause, the washer
will fill and automatically select an
Extra Large Water Level and Warm
Wash/Cold Rinse. "Wash 6 Minutes"
will appear in the Monitor.
For Soak Only, press the "Soak" pad.
After a slight pause, the washer will
immediately begin filling and automat-
ically select an "Extra Large" Water
Level, Cold Water and 30 minutes of
soak with brief periods of agitation.
"Soak 30 Minutes" will appear in the
monitor. After the soak period, the
washer will spin and drain the water.
Use this program for soaking heavily
soiled or stained items, without the
washer advancing into a wash cycle.
The load size and water temperature
can be changed by pressing the appro-
priate load and water temperature
pads. The soak time can be decreased
by pressing the .... pad.
For an extended soak period, press and
hold the'" pad, two dashes "--" will
appear in the display during fill and agi-
tation. The washer will shut off, contin-
uing to soak for an indefinite length of
time and will not drain. Simply press
the "Spin" pad to spin and drain the tub.
Generally, soak periods up to 30
minutes are sufficient for most loads.
SECTION 2. CONTROLS
2-5
©1994 Maytag Corporation