Motor Tension Springs - Maytag LAT2300 Service Manual

Motor Tension Springs
~ote:
Replacing the tensions springs
Involves working around an electrical
component - the motor. If replacing the
tension springs, always unplug the
washer from the power source to avoid
any chance of electrical shock.
The motor tension springs may be
removed and replaced without
removing the motor base from the base
frame. This may be done by using
needle nose pliers and disengaging the
spring hooks from the tabs and lower
section. Both springs are on the left
side of the motor shaft.
*'
16001145
©
SECTION 3. WASHER - SERVICE PROCEDURES
3·56
c
1994
Maytag Corporation .