Cycles - Maytag BRAVOS MVWB800VQ0 Use & Care Manual

Automatic washer
Table of Contents

Advertisement

Available languages

Available languages

Do not overfill. Do not dilute. The dispenser holds 3 oz
(94 mL), or a capful of fabric softener.
Fabric softener is dispensed in a deep rinse when the Fabric
Softener option is selected. If Extra Rinse is selected, the
fabric softener will be dispensed during the final rinse.
Do not use fabric softener dispensing balls in this washer.
Dispensing balls will not operate correctly with this washer.
Do not spill or drip any fabric softener onto the clothes.
At the end of the cycle, a small amount of water may be left
in the dispenser. This is normal.
NOTE: Use only liquid fabric softener in this dispenser.
6. Close the washer lid.
7. Select a Wash Cycle. See "Cycles."
8. Select the desired Modifiers. See "Modifiers."
9. Select an Option, if desired. See "Options." Select Fabric
Softener or Extra Rinse option if you are using liquid fabric
softener.
10. Select Delay Start, if desired. See "Delay Start" in the
"Modifiers" section.
11. Press START/PAUSE. The wash cycle begins, and the display
shows the estimated remaining time. The lid will lock.
NOTE: If you do not press Start/Pause within 5 minutes of
pressing Power/Cancel, the washer automatically shuts off.
Turn the knob to choose the correct wash cycle for the type of
fabrics you are washing. When the knob points to a cycle, the cycle
and Start/Pause indicator lights will blink. If the default settings for
the Modifiers and Options are acceptable, you may press Start/
Pause to begin the wash cycle.
Preset Cycle Settings
For ease of use, preset cycle settings provide the recommended
fabric care settings for each cycle.
To use the preset cycle settings:
1. Press POWER/CANCEL.
2. Select the cycle you want by turning the knob. The preset cycle
settings will be displayed (see following chart).
NOTE: The preset times may vary slightly depending on your
model.
3. Press START/PAUSE. The wash cycle will begin.
8

Cycles

Preset Cycle Settings
Cycle
Preset
Minutes*
Sanitary with Oxi
1:43
Super Wash
1:31
Whites
1:19
Bulky
0:52
Sheets
0:49
Normal
0:41
Wrinkle Control
0:44
Darks/Colors
0:45
Rapid Wash
0:33
Hand Wash
0:36
Clean Washer
1:01
with AffRESH
Soak
0:31
Rinse & Spin
0:24
Drain & Spin
0:14
*These times are for reference only and may not match your model
exactly.
**Cycle time in hour and minutes will appear in the display while
you are making selections.
The total cycle time will appear, including an estimated time for
drain and fill times, once Start/Pause is pressed.
NOTE: Load only to the top of the basket. Overloading can cause
poor cleaning. See "Starting Your Washer."
IMPORTANT: When washing waterproof/water-resistant items such
as plastic lined mattress pads, shower curtains, tarps, jackets, or
sleeping bags, select the lowest spin speed setting available for the
cycle and washer model being used.
Sanitary with Oxi
Use this cycle to eliminate 99.9% of bacteria when used in
conjunction with the Stain Boost with Heater cycle. Preset cycle
setting must be used to achieve the proper sanitization. Be sure to
add an oxygen based stain fighter or color safe bleach.
Super Wash
Use this cycle for heavily soiled or sturdy items. Cycle combines
high-speed wash action and high-speed spin. Stain Boost with
Heater cycle is the default option for the wash cycle, but it can
be turned off. See "Changing Cycles, Modifiers, and Options." A
Water Save Spray Rinse is a preset cycle setting for this cycle.
Whites
This cycle introduces liquid chlorine bleach to the load at the
proper time for improved whitening of your heavily soiled white
fabrics. This cycle combines high-speed wash action and high-
speed spin speed. For maximum soil and stain removal, liquid
chlorine bleach can be used in the liquid bleach dispenser or
color safe bleach, laundry boosters, or oxi in the Oxi Treat Stains
dispenser. Cycle can also be used for sturdy color fabrics, such as
towels without liquid chlorine bleach.
Bulky
Use this cycle to wash large items such as comforters, sleeping
bags, and blankets. This cycle starts with a soak to thoroughly
saturate your large load. This is followed by medium wash action
and medium spin speeds to maintain load balance.
Soil Level**
Wash/Rinse
Temp
Extra Heavy
Hot/Cold
Extra Heavy
Hot/Cold
Extra Heavy
Hot/Cold
Heavy
Warm/Cold
Heavy
Warm/Cold
Heavy
Warm/Cold
Medium
Warm/Cold
Heavy
Warm/Cold
Light
Warm/Warm
Light
Cool/Cold
Not applicable Not
applicable
Light
Cool/Cold
Not applicable Cool/Cold
Not applicable Not
applicable

Advertisement

Table of Contents
loading

Table of Contents