Installation; Water Damage From Flooding - Maytag LAT2300 Service Manual

cleaning and waxing maintains the
beauty of these finishes.
CAUTION - - - - - - - - - - ,
If "spilled" or used improperly,
bleaches and other strong
laundering chemicals can perma-
nently spot or stain finishes unless
wiped off immediately.
The top cover, lid and inner tub of the
washer have a porcelain enamel finish.
Since porcelain is actually "glass"
which is bonded to metal, it is very
durable. However, care should be
exercised to avoid damage from objects
or tools used around and in the product.
Porcelain can be chipped.
Water Damage From Flooding
In the event the washer should be
exposed to water from basement
flooding, always unplug the product and
have a qualified Maytag technician
inspect appliance before any attempt is
made to operate the unit. Never wash
product inside and out with a garden·
hose or pressure cleaning system.
INSTALLATION
Instructions for Installation:
Parts and literature are packaged
inside of washer tub. Lift tub block to
remove items. Replace Tub Block and
tape lid shut. After installation is com-
pleted be sure to remove Tub Block.
16001145
1. With the tub block in place and lid
taped shut, lay two of the carton
corner posts on the floor. Tip
washer forward on its front so it will
lay across both corner posts.
2. Remove the crate wires holding
crate base to base frame. This can
be done with a screwdriver.
SECTION 1. GENERAL INFORMATION
1-8
©1994 Maytag Corporation