Fills With Water But Will Not Agitate; Will Not Spin; Agitates Continuously - Timer Will Not Advance - Maytag LAT2300 Service Manual

CAUTION - - - - - - - - - - - - - - - - - - - - - - - - - - - ,
Always disconnect power supply before making any continuity checks or resist-
ance readings. Always use caution when doing voltage tests.
...
Fills With Water But Will Not
Agitate
• Check water level switch for conti-
nuity between terminals 7 and 16. No
continuity, replace switch.
• Check timer as shown on schematic.
• Attach motor test cord to drive motor
(refer to Electrical Test Equipment
section). If motor will not operate with
test cord, replace motor.
• Check speed switch on 2 speed
models.
Agitates Continuously - Timer Will
Not Advance
• Check timer motor. If timer motor is
not operating, replace.
• Timer motor runs but timer will not
advance. Replace timer.
16001145
Will Not Spin
• Will washer fill with water? No.
Check to see if washer is plugged into
power supply.
• Check timer line switch.
• Will washer agitate after fill? No.
Check lid switch.
• Check water level switch for conti-
nuity between 7 and 16.
• Check timer, refer to schematic.
• Check speed switch on 2 speed
models.
SECTION 4. TROUBLESHOOTING
4-8
©1994 Maytag Corporation