Setting Triggering Interval Time; (B) - ScoutGuard SG550 Series User Manual

SG550 series

4.1.8 Setting Triggering Interval Time

This parameter is only effective in the LIVE mode. It means that how long the
PIR of the camera will be disabled after each triggering in the LIVE mode. During
this period, the PIR of the device will not react to the motion of human (or animals).
This parameter has 120 values, ranging from 0 to 59 seconds (with a step of 1 second)
and from 1 to 60 minutes (with a step of 1 minute). The default value is 1 minute.
During setting the RIGHT key can also be used as an acceleration key in the same
way described in 4.1.7.
The following shows you how to set triggering interval time to "5 Minute"
provided that the previous value is "1 Minute" in MENU state:
a) Press the UP or DOWN key till the parameter "Interval" appears as shown in
the Fig. 12(a) and 12(1).
b) Press the RIGHT key till the value changes to "5 Minute" as shown in the Fig.
12(b) and 12(2).
c) Press OK key for saving setting or MENU key for canceling operation and
exiting. After pressing OK key the selected value will be no more highlighted,
shown in the Fig. 12(c) and 12(3).
4 Advanced Operation
（c）
Figure 11: Setting video length
Boly Media
(a)

(b)

(c)
Figure 12: Setting triggering interval time
Page 18
(3)
(1)
(2)
(3)