Playing Back And Deleting Operations; Stand-Alone Playback; Deleting Operations (Stand-Alone) - ScoutGuard SG550 Series User Manual

SG550 series
(see Table 1). And then the system enters into preview state and some icons
shows in the LCD as illustrated in Fig. 16(b).

4.2 Playing back and Deleting Operations

In order to play back or delete, you can also operate on pictures or videos stored
in the SD-card with the following method to be introduced. For simplicity, operations
with PC won't be introduced here. Please note that stand-alone operations of playing
back and deleting can only be done in the TEST mode.

4.2.1 Stand-alone Playback

a) TV monitor is needed if you want to play back pictures (or videos) by the
device. Therefore connect a TV monitor or a Picture Viewer (such as a digital
picture frame) that has a TV-in interface with the camera by a video cable
(included).
b) Enter into the Test mode.
c) Press the OK key. Then the latest picture (or video) will be displayed on the
TV. It is needed to press SHOT key for starting playing if it is a video clip.
When viewing images, the total number of all images in the SD-card and the
index of the displaying image are shown in the center of LCD and at the
bottom of TV monitor respectively.
d) Press the UP key for the previous picture (or video) and the DOWN key for
the next one.
e) Press the OK key to return to preview state when playback is finished.

4.2.2 Deleting Operations (Stand-alone)

a) Firstly, find the image (or video) which is going to be deleted (how to find the
object please refer to 4.2.1).
4 Advanced Operation
(a)
(b)
Figure 16: Loading default settings
Boly Media
Page 23
(1)