Setting Pixel Size - ScoutGuard SG550 Series User Manual

SG550 series

4.1.3 Setting Pixel Size

This parameter has two values: 5 mega pixels (5M Pixel or 5MP) and 3 mega
pixels (3M Pixel or 3MP). The default value is 3 mega pixels. The following shows
you how to set pixel size as "3M Pixel" provided that the previous value is "5M
Pixel" at MENU state:
a) Press the UP or DOWN key till the parameter "Image Size" appears, shown in
the Fig. 7(a) and 7(1).
b) Press the RIGHT key, the value will be changed to "3M Pixel", shown in the
Fig. 7(b) and 7(2). The value "3M Pixel" is highlighted.
c) Press OK key to save the current setting or MENU key for canceling the
setting and quitting. After pressing OK key the selected value will be no more
highlighted, shown in the Fig. 7(c) and 7(3).
4 Advanced Operation
(b)
(c)
(d)
Figure 6: Formatting SD-card
Boly Media
(a)
(b)
Page 12
(2)
(3)
(4)
(1)
(2)