SG550 series
4.1.4 Setting Video Size
This parameter also has two values: VGA (640×480)and QVGA (320×240).
The default value is "640x480" (VGA). The following shows you how to set video
size as "320×240" provided that the previous value is at "640x480":
a) Press the UP or DOWN key till the parameter "Video Size" appears, shown in
the Fig. 8(a) and 8(1).
b) Press the RIGHT key, the value of the parameter will be changed to
"320x240", shown in the Fig. 8(b) and 8(2).
c) Press OK key to save the current setting or MENU key for canceling setting
and exiting. After pressing OK key the selected value will be no more
highlighted, shown in the Fig. 8(c) and 8(3).
4.1.5 Setting Date and Time
You can change the date and time of the device by setting this parameter when
necessary, e.g., after every battery change. It must be pointed out that the function of
some keys is not the same as previous, such as UP/DOWN key is used for changing
the value of date/ time and RIGHT key is used for jumping to the next setting menu.
4 Advanced Operation
(c)
Figure 7: Setting pixel size
Boly Media
(a)
(b)
(c)
Figure 8: Setting video size
Page 13
(3)
(1)
(2)
(3)