Setting Continuous Shooting Numbers - ScoutGuard SG550 Series User Manual

SG550 series

4.1.6 Setting Continuous Shooting Numbers

This parameter affects the number of pictures taken for each triggering in the
camera mode and is effective and can be adjusted only when the device is set to the
LIVE mode. It has three values: "1 Photo" (take 1 picture after triggered) and "2
Photo" (take 2 pictures with a certain interval after each triggering) and "3 Photo"
(take 3 pictures with a certain interval after each triggering). Its default value is "1
Photo". The following shows you how to set shooting numbers as "3 Photo" provided
that the previous value is "1 Photo" in MENU state:
a) Press the UP or DOWN key till the parameter "Capture Number" appears as
shown in the Fig. 10(a) and 10(1).
b) Press the RIGHT key for two times. The value of this parameter will be
changed to "3 Photo" and the value "3 Photo" is highlighted as shown in the
Fig. 10(b) and 10(2).
c) Press OK key for saving setting or MENU key for canceling operation and
exiting. After pressing OK key the selected value will be no more highlighted,
shown in the Fig. 10(c) and 10(3).
4 Advanced Operation
(j)
(k)
(l)
Figure 9: Setting date and time
Boly Media
（a）
Page 16
(10)
(11)
(12)
(1)