Administrator/User Password - TIPTEL IP-284 Manual

Enterprise IP Phone
set according to user requirements.
The default mode is User. Users can switch the mode via Phone interface:
1) Press Menu->Level->OK to enter the configuration page.
2) Enter the User Type and Password you want to switch to.
3) Press the OK soft key to save your changes.
4) Go to Menu->Settings page, you will find the type you just added in the list.

Administrator/User Password

Administrator mode grants unlimited access to the phone configuration on both web
and phone user interface. The administrator/user password is used to access:
Web interface along with user name.

the advanced settings of the phone such as Network, Account, Reset to Factory

Settings via the Phone interface.
The default password of User and Admin is user and admin in sequence.
To change the administrator password via Phone interface:
1) Press the Menu->Settings->Advanced Settings->Enter.
2) You are prompted to enter the required password, the default one is admin.
3) Scroll to Set admin password option, then press Enter hot key to enter the
configuration interface.
4) Enter the Current PWD, New PWD and Confirm PWD; you can also press the abc hot
key to switch the input mode.
5) Press Save hot key to confirm the change, or Back hot key to return to the previous
menu.
To change the administrator password via Web interface:
Choose Security, choose User Type, enter the Current Password, New Password and
Confirm Password, then click the Confirm button to save the changes, or Cancel button
to cancel the changes.
Using the Advanced Phone Functions
- 47 -