Enterprise IP Phone
Contact Management
Edit/Add/Delete Contact
You can store a large number of contacts in your phone's contact list. You can add, edit,
delete, dial, and search for a contact in the contact list.
To add a contact via Phone interface:
1) Press Dir->Contacts->Enter.
2) Press Add hot key; enter Name, Office/Mobile number, Account and other
information of the contact from the keypad. Use the 123 soft key to select between
numeric and upper/lower case alphanumeric modes.
3) Use the navigation keys to select the desired account as Line if you want to assign
the contact to a specific account.
4) Choose and set a special ring tone for the contact.
5) Press Save hot key to add the contact or Back hot key to cancel the change.
To edit a contact record in History via Phone interface:
1) Press History hot key to enter the call history list.
2) Choose a record, press the Option hot key, and choose Detail option.
3) Press the Edit hot key to edit the number and call out.
To move a contact in History to Contacts via Phone interface:
1) Press History hot key to enter the call history list.
2) Use the navigation keys to highlight a record, and then press the Option hot key to
pop up the frame, highlight Add to Contacts option, then press the OK hot key to
enter the edit interface.
3) Press the 2aB hot key to switch the input mode.
4) After the edition, press the Save hot key to save the change. Then you can go to
Contacts interface to check the record.
Customizing Your Phone
- 20 -