Network Setting; Pc Port Setting - TIPTEL IP-284 Manual

Enterprise IP Phone

Network Setting

PC Port Setting

Please refer to the previous part "Configuration and Registration" for the basic Network
WAN setting information. The following table lists the instructions of the field about the
Network PC Port Setting.
Field Name
As Bridge
As Router
IP address
DHCP Server
Start IP Address
End IP Address
To configure PC Port settings via Phone interface:
1) Press Menu->Settings->Advanced Settings.
If you select the Bridge mode, then the two Fast Ethernet ports will
be transparent.
If you select the Router mode, the SIP phone will work as a router
User could configure the PC port IP address.
If you set the DHCP server on, the device connected to the PC port
will get the IP address automatically between the start IP address
and the end IP address. But if you select the bridge mode, the DHCP
server can not work.
Indicate the range of the IP address
Indicate the range of the IP address
Using the Advanced Phone Functions
Description
- 43 -