Controls, Connectors, And Leds - RED Epic Operation Manual

R E D D S M C O P E R AT I O N G U I D E

CONTROLS, CONNECTORS, AND LEDS

This section describes the REDMOTE controls, connectors, and color LCD display.
3
4
1
5
2
6
7
The following table describes default REDMOTE control actions. Each control is also programmable.
# REDMOTE CONTROL
1 Stills/Motion Switch
2 Release Buttons
5 Rocker Switch
6 User Function Keys
7 Menu Button
8 Soft Menu Buttons (1-3)
9 Soft Menu Buttons (4-8)
10 Navigation Group
11 Focus/Record Button
12 Power/Lock Switch
13 Mini-USB Power Port
For a full list of default user key actions for the REDMOTE, go to
COMPATIBLE CABLE
 790-0230: RED Mini-USB-to-USB cable
REDMOTE LEDS
There are two (2) status LED indicators located above the rocker switch on the left side of the LCD display.
# REDMOTE LED
3 Power/Recording LED
4 Status/Connectivity LED
COPYRIGHT © 2015 RED.COM, INC
8
9
10
11
DESCRIPTION
N/A; Currently disabled
Press and hold to undock the REDMOTE
Up: Iris open; Down: Iris close
Go to "Default Key Functions" on page 205
Toggle between basic and advanced DSMC menus
Go to "Soft Menu Buttons (1-3)" on page 142
Go to "Customize REDMOTE Setting Menus" on page 145
Go to "Navigation Group" on page 142
Half press initiates auto focus; full press toggles record start/stop
Go to "Power/Key Lock Switch" on page 142
Charges the internal battery; upgrade firmware
COLOR/FLASHING
Red
Green
Green flashing
12
2
13
REDMOTE
"Default Key Functions" on page
DESCRIPTION
Camera startup; camera recording
Camera ready; REDMOTE connected
Searching/Establishing communication
955-0020_V5.3, REV-J |
205.
141