Audio During Playback - RED Epic Operation Manual

R E D D S M C O P E R AT I O N G U I D E
AUDIO METER LEVELS
The DSMC updates the Audio Meter 12 times per second with the maximum signal from the last 1/12 of a
second period. The range of the Audio Meter is –52 dBFS to 0 dBFS.
The lines and colors indicate danger of clipping, as described in the table below:
LINE
First line (far left border; solid)
Second line (solid)
Third line (dashed)
Fourth line (dashed)
Fifth line (far right border; solid)
NOTE: In the American broadcast and post-production systems, –20 dBFS roughly corresponds to 0 VU and 4
dBu. In a digital system, dBu is an approximation; the correct unit for digital audio levels is dBFS.

AUDIO DURING PLAYBACK

The DSMC plays all recorded channels during playback, and automatically unmutes any muted audio outputs.
To access audio settings during playback, go to Menu > Settings > Audio and select the following tabs:
 Headphone
 Cam Mix
 Rear Mix
 Monitor Mix
COPYRIGHT © 2015 RED.COM, INC
DBFS BAR COLOR
–52 dBFS Green
–20 dBFS Green
–12 dBFS Yellow
–2 dBFS Red
0 dBFS Red
DESCRIPTION
Audio is not clipping
Audio is not clipping
Audio close to clipping
Audio is clipping
Audio is clipping (if signal exceeds –1 dBFS,
the whole bar is red)
955-0020_V5.3, REV-J | 139