Introduction; Equipment - ESAB OrigoFeed 30-4 Instruction Manual

Hide thumbs Also See for OrigoFeed 30-4:
Table of Contents

Advertisement

GB
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER'S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS' HAZARD DATA.
ELECTRIC SHOCK - - Can kill
Install and earth the welding unit in accordance with applicable standards.
S
Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S
Insulate yourself from earth and the workpiece.
S
Ensure your working stance is safe.
S
FUMES AND GASES - - Can be dangerous to health
Keep your head out of the fumes.
S
Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
S
and the general area.
ARC RAYS - - Can injure eyes and burn skin.
Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
S
clothing.
Protect bystanders with suitable screens or curtains.
S
FIRE HAZARD
Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
S
NOISE - - Excessive noise can damage hearing
Protect your ears. Use earmuffs or other hearing protection.
S
Warn bystanders of the risk.
S
MALFUNCTION - - Call for expert assistance in the event of malfunction.
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ESAB can provide you with all necessary welding protection and accessories.
WARNING!
Do not use the power source for thawing frozen pipes.
This product is solely intended for arc welding.
3

INTRODUCTION

The OrigoFeed 30- -4 wire feed units are intended for MIG/MAG welding with the
OrigoMig 405 power source.
They come in different variants, see page 13.
The feed units can be used together with wire on ESAB's MarathonPact, or on wire
bobbin Ø 300 mm.
They can be installed either at the power source, suspended above the workplace,
on a support arm or on the floor with or without wheel set.
ESAB's accessories for the product can be found on page 16.
3.1

Equipment

The wire feed units are supplied with an instruction manual and stickers.
bm38d1ea
WARNING
PROTECT YOURSELF AND OTHERS!
- - 4 - -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents