Wear Components - ESAB OrigoFeed 30-4 Instruction Manual

OrigoFeed 30- 4

Wear components

Item Ordering no.
HN1 0455 072 002 Intermediate nozzle (S)
0456 615 001 Intermediate nozzle
HN2 0469 837 880 Outlet nozzle (S)
0469 837 881 Outlet nozzle
HN3 0191 496 114 Woodruff wedge
HN4 0459 440 001 Motor gear euro
HN5 Washer
HN6 Screw
HN7 Screw
HN8 Washer
HN9 0469 838 001 Cover
HN10 0458 722 880 Axle and Nut
HN11 0369 557 001 Feed roller
0369 557 002 Feed roller
0369 557 003 Feed roller (S)
0369 557 004 Feed roller
0369 557 011 Feed roller
0369 557 006 Feed roller
HN12 0459 441 880 Gear adapter
HN13 0455 049 001 Inlet nozzle
HN14 0455 906 001 Spacer sleeve
HN15 0455 907 001 Pressure roller
HN16 0215 702 708 Locking washer
HN17 0459 518 001 Axel pressure roll
HN18 Nut
HN19 0458 748 002 Insulating washer
HN20 0458 748 001 Insulating bushing
HN21 0156 602 001 Inlet nozzle (S)
0332 318 001 Inlet nozzle (HD)
Welding with aluminium wire
In order to weld with aluminium wire, proper rollers, nozzles and liners for aluminium wire MUST be
used, It is recommended to use 3 m long welding gun for aluminium wire, equipped with appropriate
wear parts.
bm38whn1
Denomination
For Fe, Ss & cored wire
For Al Wire
For Fe, Ss & cored wire, Ø 2.0 mm steel for 0.6- -1.6 mm
For Al wire, Ø 2.0 mm plastic for 0.8- -1.6 mm
Ø 16/5x1
M4x12
M6x12
Ø 12/6.4x1.5
For Fe, Ss & cored wire, Ø 0.6 & 0.8 mm, V groove
For Fe, Ss & cored wire, Ø 0.8 & 1.0 mm, V groove
For Fe, Ss & cored wire, Ø 1.0 & 1.2 mm, V groove
For Cored wire, Ø 1.0/1.2 & 1.4/1.6 mm, V- -Knurled groove
For Al wire, Ø 0.8 & 0.9 mm, U groove
For Al wire, Ø 1.0 & 1.2 mm, U groove
Flat
M10
For Fe, Ss, Al & Cored wire, Ø 2 mm plastic for 0.6- -1.6 mm
For Fe, Ss & Cored wire, Ø 2.4 mm steel for 1.2- -2.0 mm
Notes
- - 14 - -
S= Standard, HD = Heavy Duty
Edition 040507