Status; Name; Global Brightness; Global Standby - Classe Audio CP-700 Owner's Manual

global brightness By setting all your components to global brightness you can adjust the
global standby By setting all your components to global standby you can bring your entire
CAN-Bus model
specific features
36
status The status screen is the simplest way to access essential information about
the target unit. It displays the target unit's model number, software version,
operational status and serial number.
name Allows you to set the name that this component will be listed under in the
CAN-Bus devices screen. The name will appear next to the unit model and serial
number, and facilitate the identification of units in large systems.
touchscreen and LED brightness for your entire system by changing the
brightness of a single touchscreen. All CAN-Bus software updates automatically
set the updated unit to Global Brightness. If you want a particular unit to be
excluded from Global Brightness, deselect Global Brightness for that unit.
system in and out of standby by pressing the standby button of any unit or
remote. All CAN-Bus software updates automatically set the updated unit to
global standby. If you want a particular unit to be excluded from global standby,
deselect global standby for that unit.
The following CAN-Bus features are model specific.
PlayLink This feature is exclusive to Delta series disc players and will only function if
the disc player is connected to a CAN-Bus enabled preamp or surround sound
processor.
When PlayLink is active, pressing play on the disc player will also automatically
switch the preamp/processor to a specified input. This means that you can listen
to a CD or watch a DVD literally at the touch of a button.
The first step in using PlayLink is to choose the input you wish to be selected
when play is pressed on the disc player. Press the PlayLink icon, then select the
correct input from the list.
Once you have selected the input press back, then select configuration.
PlayLink is activated and disabled through the PlayLink icon on the CAN-Bus
configuration screen.