Specifications - Classe Audio CP-700 Owner's Manual

Preamplifier
Hide thumbs Also See for CP-700:
Table of Contents

Advertisement

42

Specifications

All specifications are accurate at the time of printing. Classé reserves the right to
adjust specifications without notice.
n Frequency response
n Distortion (THD + noise)
n Maximum input voltage (single-ended)
n Maximum input voltage (balanced)
n Maximum output voltage (single-ended)
n Maximum output voltage (balanced)
n Gain range
n Input Impedance (single ended)
n Input Impedance (balanced)
n Output Impedance
n Signal to noise ratio (unweighted) 20Hz to 500kHz
n Channel separation
n Crosstalk (any input to any output)
n Rated power consumption
n Idle power consumption
n Mains voltage
n Overall dimensions (preamplifier)
n Overall dimensions (power supply)
n Net weight (preamplifier)
n Net weight (power supply)
n Shipping weight
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX
+1 (514) 636-1428
Internet: http://www.classeaudio.com
email:
cservice@classeaudio.com
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.
20 Hz – 200kHz ± 0.1dB
better than -120dB @ 1kHz
determined by the needs of country for which
the unit was manufactured;
cannot be reset by dealer or user
Width: 17.5" (445mm)
Depth: 16.5" (419mm)
Height: 4.75" (121mm)
Height: 5.5" (140mm)
0.0012%
5Vrms
10Vrms
10Vrms
20Vrms
-86dB to +14dB
100kW
200kW
100W
100dB
130dB at 1kHz
42W
29W
Width: 5" (127mm)
Depth: 12" (305mm)
23lbs (10.5kg)
10lbs (4.6kg)
45lbs (20.5kg)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-500

Table of Contents