Load Font Character Set Control - Ricoh MP 6002 User Manual

10. Loaded Font Command Set
Technology Specific Font Objects
The technology specific LF3 font object supported is a form of Adobe Type-1 PFB file. Each PFB
object contains the following information.
Offset
0-3 X'0000000
A' -
X'FFFFFFFF'
4-7
8-9 X'0002' -
X'FFFF'
10-n
(n+1)-z

Load Font Character Set Control

This command provides control information for each font character set that the host downloads to the
printer. The command is only used for LF-3 type coded fonts. The LFCSC command is followed by one or
more Load Font commands that contain the actual font character set information. This command is valid
only in home state and causes a transition to font state. Font state ends when the printer receives the End
command following receipt of at least one LF command.
Offset Range
0-1 X'0001' -
X'7EFF'
2-3 X'0000'
4
X'1F'
5 X'00'
216
Range
LENGTH of Adobe Type-1 PFB file (including this field)
CHECKSUM
LENGTH of Adobe PFB object NAME
Adobe PFB Object NAME
OBJECT DATA for Adobe Type-1 PFB fonts (PFB file)
FONT CHARACTER SET HAID
Reserved
PATTERN TECHNOLOGY ID
Type 1 PFB
Adobe PFB Object NAME
Meaning
Meaning
Error
Code
X'02B1..0
8'
X'02B1..0
9'
X'02B1..0
A
Error Code
X'02B0..0
A'
X'02B0..0
B'