Ricoh MP 6002 User Manual page 1005

Item
Parts Number
Version
Machine Data Encryption Key
Operation
Machine Data Encryption Key
Type
Validity Error File Name
Configuration Category
Configuration name
Configuration value
Destination Server Name
Hdd Init Partition No.
Firmware module part number.
Firmware version.
Indicates the type of encryption key operation performed:
"Back Up Machine Data Encryption Key" indicates an
encryption key backup was performed.
"Restore Machine Data Encryption Key" indicates an
encryption key was restored.
"Clear NVRAM" indicates the NVRAM was cleared.
"Start Updating Machine Data Encryption Key" indicates an
encryption key update was started.
"Finish Updating Machine Data Encryption Key" indicates an
encryption key update was finished.
Identifies the type of the encryption key as "Encryption Key for
Hard Disk", "Encryption Key for NVRAM", or "Device
Certificate".
Indicates the name of the file in which a validity error was
detected.
The category whose settings were changed is recorded.
For details, see "Category/Attribute List".
The attributes of the categories are recorded.
For details, see "Category/Attribute List".
The values of the attributes are recorded.
For details, see "Category/Attribute List".
If the log type is "SDK Tracking", the name of the destination
server that tracking information failed to be sent is recorded.
If the log type is import or export of preference information, the
name of the server that a data export or import request is
issued from is recorded.
The initial status of each hard disk partition is recorded.
Managing Log Files
Content
239