Ricoh MP 6002 User Manual page 1056

8. Troubleshooting
Error Code
W0606-004
W0612-005
W0707-001
LDAP authentication
Error Code
L0103-000
L0104-000
L0105-000
290
Cause
Authentication failed because the
user name contains language that
cannot be used by general users.
Authentication failed because no
more users can be registered. (The
number of users registered in the
Address Book has reached
capacity.)
An authentication error occurred
because the Address Book is being
used at another location.
Cause
A TWAIN operation occurred
during authentication.
Failed to encrypt password.
A login user name was not specified
but a DeskTopBinder operation was
performed.
Solution
Do not use "other", "admin",
"supervisor" or "HIDE*" in general
user accounts.
Ask the user administrator to delete
unused user accounts in the Address
Book.
Wait a few minutes and then try
again.
Solution
Make sure no other user is logged in
to the machine, and then try again.
1. A password error occurred.
Make sure the password is entered
correctly.
2. Either [DES] or [AES] is selected
for "Driver Encryption Key:
Encryption Strength".
The administrator has restricted use
of simple encryption. You can use
the encryption key if it has been
specified in the driver.
3. A driver encryption key error
occurred.
Make sure that the encryption key is
correctly specified on the driver.
Set the DeskTopBinder login user
name correctly.