Ricoh MP 6002 User Manual page 626

1. Device Control Command Set
Offset Range
6-7
X'0960'
X'0BB8'
X'1770'
8-9
X'0960'
X'0BB8'
X'1770'
• Value for byte 5 is controlled by the [Resolution] setting in the IPDS menu. Byte 5 will indicate
Resolution Acceptance mode X'00' if the IPDS Resolution setting is 240, 300 or 600 DPI. Byte 5
will indicate Resolution Independence mode X'FF' if the IPDS Resolution setting is Auto.
• Values for bytes 6-9 are controlled by the setting of byte 5 (Font Resolutions). If byte 5 indicates
Resolution Acceptance mode X'00', bytes 6-9 reflect the [Resolution] setting in the IPDS menu. If
byte 5 indicates Resolution Independence mode X'FF', bytes 6-9 reflect the [Print Mode] setting in
the IPDS menu. Note that the resolutions specified also apply to GOCA image if the image
resolution specified in the GDD command is X'0000', indicating that no explicit GOCA image
resolution was specified.
• If the [Print Mode] = STD (Standard 300 DPI), then the [Resolution] setting is ignored. Byte 5 will
indicate Resolution Acceptance mode X'00' and bytes 6- 9 will reflect the IPDS Print Mode setting
(300 DPI).
• For the printer to specify IPDS Resolution support of 240, 600, or AUTO, the IPDS Print Mode must
be set to Enhanced (PRINT MODE = ENH on the IPDS Menu). In enhanced print mode, complex
(full page) image jobs may not yield optimal print performance due to the increased print fidelity
required to accurately render 240 and 600 DPI print objects.
Storage Pools Self-Defining Field - Single Byte
Offset Range
0-1 X'0033'
2-3 X'0004'
4 X'2F'
92
X PIXELS per Unit Base
2400 pixels/10 inches
3000 pixels/10 inches
6000 pixels/10 inches
Y PIXELS per Unit Base
2400 pixels/10 inches
3000 pixels/10 inches
6000 pixels/10 inches
VECTOR LENGTH
STORAGE POOLS Self-Defining Field
LENGTH of each Storage Pool Self-Defining Field
Meaning
Meaning