Rrl Rt'07' Font Character Sets (Gcsgid/Fgid/Fw) - Ricoh MP 6002 User Manual

5. Code Page and Font Identification

RRL RT'07' Font Character Sets (GCSGID/FGID/FW)

• Valid combinations for the IBM Core Interchange Set are listed inp.90 "Code Page" (IBM Core
Interchange Resident Scalable Font Set), and will be reported via XOARRL RT 07 RIDF 03.
• Scalable Font Width (FW) will be reported as 0 to the host PSF. This indicates that any width/
scale-factor is valid.
• p.92 "Operating System/400 Terms" (GCSGID Subsets for IBM Core Interchange Fonts)
shows the subset GCSGIDs for each of the listed superset GCSGIDs in p.90 "Code Page"
(IBM Core Interchange Resident Scalable Font Set). These subset GCSGIDs are valid
combinations for the associated superset GCSGIDs in the GCSGID/ FGID/FW, but will not
be added to the RRL 0703 response unless required by the host PSF's.
• Valid combinations for the IBM Coordinated Set are listed in p.97 "XOA-RRL Replies for Font
Character Sets" (Resident PSC Strategic Scalable Font Set 2) and will be reported via XOA-RRL RT
07 RIDF 03.
• Scalable Font Width (FW) will be reported as 0 to the host PSF. This indicates that any width/
scale-factor is valid.
• p.97 "XOA-RRL Replies for Font Character Sets" (GCSGID Subsets for the Strategic Font Set
2) shows the subset GCSGIDs for each of the listed superset GCSGIDs in p.96 "IBM Core
Interchange Resident Scalable Font Set (IPDS only)" (Resident PSC Strategic Scalable Font Set
2). These subset GCSGIDs are valid combination entries for the associated superset
GCSGIDs in the GCSGID/FGID/FW, but will not be added to the RRL 0703 response unless
required by the host PSF's.
• Valid combinations for the 4028 Compatibility Set require p.94 "Font and Code Page Selection"
(FGID/FW) and p.95 "Resident IPDS Fonts" (GCSGID), and will be reported via XOA-RRL RT 07
RIDF 03.
• The FW's for these fonts are non-zero, because they represent fixed-width fonts.
• The Alternate FGIDs are valid values for GCSGID/FGID/FW combinations.
• Native Mode - These fonts (which are representing 4028 raster fonts) don't have a GCSGID
of their own, so the GCSGID used is from the associated Code Pages (CPGIDs).The
GCSGIDs are obtained by finding the Code Page(s) in p.95 "Resident IPDS Fonts" that
matches the Code Page(s) listed for a given FGID/FW entry in p.94 "Font and Code Page
Selection". The GCSGID for each of the Code Pages listed with an FGID is a valid
combination entry. Since these fonts don't have a superset GCSGID, there is no subset
condition. So each of these unique GCSGID/FGID/FW combinations will be added to the
XOA-RRL 0703 report to the host PSF.
• 4028 Emulation Mode - These fonts (which are representing 4028 raster fonts) don't have a
GCSGID of their own, so the GCSGID used is 0.
14
86