Execute Order Home State (Xoh); Xoh Obtain Printer Characteristics; Printable Area Self-Defining Field - Ricoh MP 6002 User Manual

Hide thumbs Also See for MP 6002:

Table of Contents

Execute Order Home State (XOH)

Each Execute Order Homestate command consists of a two-byte order code followed by zero or more

bytes of parameters.

This order causes a set of self-defined fields describing printer characteristics to be placed in the Special

Data Area of the requested Acknowledge Reply and is identified with an acknowledgement type of

X'46'. If the ARQ flag was not set on the XOH command containing this order, then this order is

equivalent to a No Operation.

• The printer provides two modes that determine the specification of the Xm Offset, Ym Offset, Xm

Extent and Ym Extent of the Printable Area.

• Restricted (No Print Border) (Guaranteed Print Legibility) (Default)

• Unrestricted (Edge-to-Edge Addressability)

• The Xm Extent and Ym Extent of the Printable Area parameters documented in the following table

are representative of the standard printer source media configuration. These extents can be

modified as a result of receiving a XOHSMO command, as described in p.108 "XOH Set Media

• Actual tray capacities are determined media weight. The capacities in the following table are the

maximum allowable.

• The machine supports media source tray numbering. Media source values in the printer's control

panel OPC support tables represent the default settings when the printer is initially installed. An the

menu mode is provided to allow customers to specify the source tray numbers to meet requirements

of legacy applications. Example: customer might want to address the Manual Tray as tray 4

instead of the tray 100 (default).

• For the tray in which "envelope" has been specified as the paper type, the tray values of the tray ID

are (in ascending for each respective tray that is installed) as follows: X'8040', X'8041', etc. If a

different paper type is specified for the tray, the tray values of the tray ID are (in ascending for

each respective tray that is installed) as follows: X'8000', X'8001', etc. In regards to the bypass

OPC Order Code

Execute Order Home State (XOH)

Table of Contents